NO HEAT NEEDED!
They can be applied to the following: glass, metal, plastic, ceramics, wood, leather, paper, and cardboard.
1. Prepare your surface by cleaning it with alcohol and allowing it to dry.
2. Use your hands and apply pressure over the print to be sure the print is adhering to the transfer film.
3. Cut your UV DTF transfer and peel from the white backing. If the transfer isn’t adhering to the clear film set the film back down and press over the print with your fingers with a little pressure. If you rip the clear film off without all pieces of the design connected to the transfer film you will not be able to place it properly back on the film.
2. Identify where you want to place the transfer. Lightly place the transfer on the cup ensuring the design is straight and positioned correctly.
**Remember the adhesive is strong! Once the transfer touches the glass it is very difficult to remove.
3. Press the transfer down, working from the center outwards, pushing out any bubbles. It helps to use a tool like an old credit card to reduce bubbles and avoid wrinkles.
4. Rub all over the design with your fingers or tool. The more rubbing the better.
5. Peel clear the film off very slowly and you're done! If you peel and the transfer is coming off with the clear transfer film then press back down and apply more pressure all over the transfer before peeling again.
Hand wash only. We do not advise to put in a dishwasher. DO NOT MICROWAVE!
UV DTF wraps are long-lasting and durable permanent stickers that have excellent color retention and resistance to chipping. However, durability and adhesion are affected by application. We are not responsible for application mishaps. Therefore, we cannot provide any warranties or guarantees as it is dependent on the applicator.
*Please note: Not all brands of glass cups have the exact same measurements. They can differ by a couple of millimeters. Our wraps have been measured to fit Libbey glass cans. Adjustments may be necessary*
NO HEAT NEEDED!
They can be applied to the following: glass, metal, plastic, ceramics, wood, leather, paper, and cardboard.
1. Prepare your surface by cleaning it with alcohol and allowing it to dry.
2. Use your hands and apply pressure over the print to be sure the print is adhering to the transfer film.
3. Cut your UV DTF transfer and peel from the white backing. If the transfer isn’t adhering to the clear film set the film back down and press over the print with your fingers with a little pressure. If you rip the clear film off without all pieces of the design connected to the transfer film you will not be able to place it properly back on the film.
2. Identify where you want to place the transfer. Lightly place the transfer on the cup ensuring the design is straight and positioned correctly.
**Remember the adhesive is strong! Once the transfer touches the glass it is very difficult to remove.
3. Press the transfer down, working from the center outwards, pushing out any bubbles. It helps to use a tool like an old credit card to reduce bubbles and avoid wrinkles.
4. Rub all over the design with your fingers or tool. The more rubbing the better.
5. Peel clear the film off very slowly and you're done! If you peel and the transfer is coming off with the clear transfer film then press back down and apply more pressure all over the transfer before peeling again.
Hand wash only. We do not advise to put in a dishwasher. DO NOT MICROWAVE!
UV DTF wraps are long-lasting and durable permanent stickers that have excellent color retention and resistance to chipping. However, durability and adhesion are affected by application. We are not responsible for application mishaps. Therefore, we cannot provide any warranties or guarantees as it is dependent on the applicator.
*Please note: Not all brands of glass cups have the exact same measurements. They can differ by a couple of millimeters. Our wraps have been measured to fit Libbey glass cans. Adjustments may be necessary*
Use a multi-column section to organize detailed information about your products:
SCREEN & DTF PRINTS
These prints can go on any Fabric and any color. You do need a professional heat press to apply it, a handheld press is not recommended. Instructions included with your order!
UV DTF CUP WRAPS
You do not need any machines to apply these. Directions will be included with your order!
SUBLIMATION PRINTS
These prints should be used on a high poly count light colored shirt! The higher poly count the more vibrant the image! Instructions included with your order!